Request an Estimate

Warning Signs of Head Gasket Problems

The engine is the most expensive and important part of the vehicle. Proper care of the engine is vital to keep the car in good working order. Aside from oil changes and basic maintenance, it is important to pay attention to signs that a problem might be developing. The head gasket is a vital part of the engine. Located between the engine block and the cylinder head, it keeps the cylinders properly sealed and maintains needed compression.

The head gasket also helps keep the engine coolant sealed. If there is rapid pressure buildup in the cooling system before the engine has fully warmed up, it could mean that the head gasket has failed. The engine coolant may leak out onto the ground. If there is foaming, gurgling, or bubbling in the coolant system, this can also be a sign of a blown head gasket.

The head gasket also prevents oil leakage.  If the gasket is blown, oil can leak slowly with a minor leak or leak fast enough to empty the oil rapidly. Sometimes blue or white smoke will come out of the tail pipe, indicating that the oil is being burned.

Oil may drip from the gasket itself or there could be water mixing with the oil. To check for this, take the dipstick out quickly enough to keep some oil on the stick and allow a drop of fluid to land on the hot engine. Oil will smoke. If there is water in it, it will also sizzle.

Sometimes it is difficult to determine the cause of an oil leak, but a blown head gasket is frequently the culprit. Additionally, with the lack of proper sealing between the engine block and the cylinder head, hydrocarbons or carbon monoxide can leak into the cooling reservoir. Sometimes this causes a rough engine or a loss of power because of the reduced compression.

With any of these symptoms of a blown or damaged head gasket, it is vital that you pay attention to the issue and get it checked. Taking the vehicle in to your local Utah auto repair shop is the best plan to get the problem resolved and avoid further expensive damage.

admin

0comments

13 Sep, 2012

Automotive Info

Comments

Type a comment

Submit

Current ye@r *